▷ Air Conditioning DOES NOT COOL and only Ventilates

Has it ever happened to you that your device from air conditioner starts blowing out hot air instead of cooling your room like you expected?

This can make you nervous and quite anxious, especially when we are in the heat of summer, and the worst part is that it is a completely normal failure and will happen more often than you can imagine.

But don’t worry because we are specialists in air conditioners and we have made a guide with the most common reasons why the air conditioner does not cold and moreover, how to solve them. We will see them!

Why is the air conditioner not cooling?

Now we will explain to you the most frequent reasons why an air conditioner is only ventilating and how can you fix it

Dirt in Air filter

The most common reason why any kind of air conditioning stops cooling it’s thanks to the daire filters being dirty.

If this very important part is not cleaned continuously, it becomes blocked by the accumulation of dust and grime, causing numerous inconveniences such as blocking the passage of cold and warm air inside the ducts. It also damages the thermostat and freezes the evaporator coil.

To fix this problem, you must check the condition and integrity of the filter and change it as soon as possible, in the event that it is clogged.

Incorrect thermostat setting

This has the potential to be a drawback if your air conditioner starts out blowing cold air and then warm air. In this situation it is necessary change settings of the thermostat in automatic mode, with the purpose that the fan is alone when the air is cooling.

Dirty condenser

To understand this drawback you must have a concept of how air conditioning works There is an internal drive or evaporator which absorbs heat from the air and transfers it to the external unit or condenser, which condenses the hot air into cold air.

If this external unit is obstructed, the correct cooling of the air conditioning system cannot occur, since debris and dirt will prevent heat transfer. To offer satisfaction to this inconvenience you must clean the condenser leaving an extensive space for it to achieve its functionality.

Engine defects

If the fan motor is broken or defective, the condenser will not be able to dissipate heat, which will interfere with the cooling ability of the air conditioning unit. This needs the involvement of a professional.

Low coolant level

The cooling system of the assembly needs a dynamic coolant substance that adsorbs heat from the air surrounding, the loss or knowledge of this substance causes the cooling not to happen. If your air conditioner is not cooling, it could be because the refrigerant is leaking. This drawback can be identified through rare sounds.

Compressor problems

A compressor manages the refrigerant fluid between the evaporator and the condenser, for this reason if air cooling is not likely to fail. If this happens you need to replace it and then you have to hire a professional.

To keep your air conditioning unit running properly, you need to plan for regular care. What is suggested is that it happens every 3 months, so we take advantage of the effectiveness and performance of your set.

If you do not take the required care your electricity bill can skyrocket and you will have to suffer from the high temperatures. It prevents you from making overpayments until you acquire a new set and offer it to you correct care who you already have